Silfloor SFC
Silfloor SFC is a high build, solvent free epoxy resin floor coating which provides a hard wearing, chemical and abrasion resistant floor finish.
It is ideally suited for use in wet areas where a high degree of resistance to chemicals, oils, and grease is required. It is a solvent free system based on epoxy resins and curing agents specially selected for their ability to withstand chemical attacks.
The system consists of pre-weighed base & hardener components and a Silfloor color pack, all of which contain reactive elements that are essential to the installation of the system. A slip resistant texture can be provided by the use of one of a range of Silfloor Antislip Grains which have been carefully graded to ensure an even texture.
Usages and Advantage
- Durable, low maintenance costs.
- Proven against a wide range of industrial chemicals.
- Solvent free – no odour during application.
- Slip resistant – different textures available to suit conditions to avoid slipping.
- Liquid applied providing complete protection.
- Available in a wide range of colors to improve the working environment and identify slip hazard areas.
Description
The epoxy resin floor coating shall be Silfloor SFC from Silkon. The total dry film thickness of the coating shall be a minimum of 400 microns and shall have a compressive strength of 75 N/mm2, flexural strength of 40 N/mm2 and a tensile strength of 20 N/mm2. The floor shall be prepared and the coating mixed and applied in accordance with the manufacturer’s current data sheet.
This is applied as a floor coating system comprising of two top coats (depending on the substrate conditions a primer might be required), each top coat to be a minimum of 200 microns thick. To provide a slip resistant texture, the first top coat can be dressed with Silfloor Antislip Grains.